The BEST tractor dealer and parts place around... Such a great pleasure to visit and get what I need quick and affordable....

I had M & L in Baton Rouge repair the internal lift forks on a L3710 GST ( 3 point hitch) owned by a friend and the cast iron plate below the seat which had to be removed to access the internals was apparently replaced using an impact driver to tighten the fasteners rather than a torque wrench. As a result of this the plate later fractured spraying hot hydraulic fluid all over the operator and rendering the tractor useless. Upon removal of the plate I found the fasteners to be torqued in the range of 25 lb-ft to 130 lb-ft which, I believe, is indicative of shoddy work and led directly to the failure of the plate. Large cast iron plates must be torqued in a proper sequence and incrementally to the recommended torque. Of course M & L says It;s not their fault and will do nothing to help remedy the situation. The owner of the tractor is having to pay over $1000 for a new plate, but M & L is not going to install it. I would not trust these folks for any except the simplest of maintenance or repairs. They DO NOT stand behind their work.

Knowledgable staff. Theyll take the time to research the part you need if they dont happen to have it in stock. Good stuff! Thanks for the help.

Associate was very helpful and knowledgeable...

Had the part I needed in stock. Service was great

Great people no sell man rush

Expensive, but good service

Great service