Everyone that works here was super friendly and gave me great quality work I honestly couldn’t ask for better. these guys are my go to for any engine repair for now on

Great place to take engine parts reworked .Fair prices and turnaround Pretty quick.

My husband had his 350 4 bolt main for his 77 vette there had the heads resurfaced valve job done new valve stem seals installed had the heads magnafluxed and pressure checked had the blocked honed to 40 over new freeze plugs installed new cam bearings also blocked cleaned very fast turnaround rate and very professional and respectful thanks jerrid!!!

Jerrid is a very good at what he does had a 2016 dodge 5.7 hemi drop a valve and broke a guide took the heads to him he installed a new valve replaced guide and all new comp beehive springs also got the broken exhaust bolt out for free for me that hemi runs better than ever I refer him to everyone I know if they need quality machine work done he is the one tocall!!!

I went to Jerrid with a cracked head from my charter boat. The head was off of a 903 Cummins and hard to find. He found me a used head from a tractor which he completely rebuilt and now the engine runs great.

He is very nice person n he do a great job

I have been doing business with these guys for decades and everything has been done with excellent care and precision. Great customer service and i have no complaints! Reasonable and fair pricing! To all those negative reviews dont believe them! Just go by his shop and see for your self you wont be disappointed Guarranteed!😊😊

Awesome experience, from the first call too picking up my head was very enjoyable super nice people, great prices and fast thorough job.. Thank yall for the quick turn around and the impeccable quality of your work on my cobalt head.. will use yall againThanks again,Robby

Another perfect job by these guys

2 jobs needed to be done, engine head valve guides, and lower block balance shaft bearings. Had replaced 4 valve guides with new performance ones. When receiving the head back, I noticed on one of the seats it was cracked Not good at all. I know a air hammer was likely used(maybe a press idk) and who ever did the job was not careful at all! Another time I needed a balance shaft bearing installed, when receiving the block back, I inspected the bearings and saw 1 bearing oil port was not correctly lined up(centered with the port), another poorly job done by one of the workers. I stopped doing business with these guys. Jerrid is cool, but the other guys I cant speak for.Inspect your part when receiving it back.Edit: 1/21/20Since this was a awhile back of having some parts done. Was 8 exhaust guides. I didn’t recall because was quite some time ago. Car was done recently, of this year, I was building the motor and restoring the car.Photos are from piston one exhaust valve number 2 on a 4g63T. Valve guides were bronze shorty with stoppers. And was wrongfully inserted. Was pressed or hammered in with too much down force.I disassembled my block, removed the fallowing lock, retainer, spring and seat. Photos show the outcome of a failed installation service, and few more that are leaking from the guides as shown.Edit: 11/23/21 found another crack that I wasn’t able to see looked like debris but closer look you can see the hairline crack. I swear this shop cost me hundreds. Paid for the dam guide installation, did a head resurface and valve job. Now I’m back to square one. Thanks a lot. Jarred please have your workers triple check everything man. Uncalled for!!!!Photo is left to show...

Best machine shop in town

Took my Dodge 318 project engine in for machine work. They turned out some awesome work for me and I have done repeat business with Jerrod since. Jerrod is a awesome machinist and can handle any of your engine work as he has been in the business hands on for over 25 years and knows engines, hot rods and hot rodding inside and out. They are the very best in the business.

Great guy good service always has my stuff ready has everything I need and more

Excellent I have been doing business with this machine shop for years and always great experience

Great work

Great service and detailed work

The best in the business and good turn out every time for15 year

I’m the owner of an automotive shop in town and I’ve been getting cylinder heads rebuilt here for years . They do great work!

Took a 440 mopar in here because he said he had a torque plate. Had them bore it out 30 over i got the engine block back he said i had a rare condition in the block due to high carbon in the casting and it caused pitting evenly throughout all 8 cylinders and was told it was fine and i could run the engine as it was. Got a second opinion from 2 other shops in town both of whom said they have never herd of such thing and they say it looks like they used dull tools to machine it and that they dont think they used a torque plate like i paid for. Now i have to have some one else go 40 over and hope it cleans up. They also messed up the bevel at the top of the cylinder. These guys trashed my block refused to give me my money back and lied to me about my block. I also just found out about another guy who took a 5.7 to them and had the same thing happen. If i was you i would avoid this shop amd try the another machine shop in town.

Damn fine job yall did for me, thank you and look forward to doing more for business with you if I have any more problems with my other equipment.

Excellent service

Misunderstood service and price are great. Parking for disable people did not see one.

Awesome engine repair service 100% recomendéd

Good service

Best food in town

It is my dads shop and he owns it and im serious to, but he does engine heads 😎

Very professional

Had a head

Awesome people