Don helped me in a pinch with a 2 day turn around. Needed a new v-band flange welded to my downpipe. Don has earned my business based on time, speed, price and professionalism.Don thank you for your service to this country and thank you for helping me out on such short notice. You sir are worth your weight in gold.

Friendly, well informed, great pricing and extremely knowledgeable. Would recommend to anyone

Did excellent job on my jet ski🤙👍

Precision cycle is simply the best! Im an avid fisherman and I found out that my 50 hp outboard had a broken piston ring. Worst news possible. I needed the cylinders bored and then needed to know the bore size before ordering the rebuild kit. Don bored out my cylinders, and then ordered and received the kit, all in less than 24 hours! Thats service at its finest. Dons prices are also very reasonable. Ill never use another machine shop as long as Dons in business.

Don is an exceptional machinist/welder/fabricator. Had cylinders rebored on a 74 Motorcycle. Great job.

Awesome service, best place in the United States for all of your needs.

I went here by recommendation from a friend and Im absolutely glad I took him up on this place. I had a 77 CR125m I was restoring and Don at Precision Cycle was a tremendous help. Super friendly, knowledgeable and thorough in his work. His pricing was absolutely perfect and speed of work was much quicker than I expected.Most places offer Quality, Speed, or Low Price but you can only pick two, at this location you get all three for sure! Will be returning for any future work that pops up!

The lower part of my outboard engine required a presicion welding job . Don and Tom delivered the expected results on craftmanship, quality añd time very satisfactorily .Thank you

The man has a boring job and he loves hes been in business 40yrs a very good man knows what hes doing my experience one of the best. service good prices good

Excellent place to go. Don is super friendly and genuinely cares. Had him remove old bearings and press new ones in on my crf450r.

Hands down the best around town had my cylinder bored in less than 24hrs DON YOUR THE MAN all my group will be visiting your for all types of work for sleeves, aluminum welding etc.. great business keep it up

Wish I could give them 10 stars. One of the injectors went lean on my Yamaha 250 HDPI and destroyed the piston. This scored the liner and damaged the exhaust port. A new block was $4,100, not good. After some research, I found Precision Cycle. Called them to discuss a possible replacement of the liner. They were very helpful and knowledgeable. I built wood shipping crate and send it off for repair. Since I was going to be in the area in 3 weeks I asked that it be ready for my pick up then. Three weeks later and precisely on time, I picked up the block with the new liner. They could not have been more friendly and more professional.Once home, I reassembled the engine with a new piston and rings. The liner was perfect. I have put about 50 hours on the motor since and it has worked flawlessly. The cost of repair was about $400 or 90% less than a new block! I cannot recommend them more highly! Nice Job!

Best place by far! Great service! Great prices! All around awesome guy! Thank you again! Highly recommend!

I had to get cylinders bored on my outboard and its getting close to spring. Luckily I found precision cycles inc. Read the reviews and calledspoke with Don the owner great person. Sent my power head to himhe had work done the day after receiving it got me a rebuild kit to go with it. I got it back 1 1/2 weeks after shipping it to him and the work is great.It is really nice to deal with people and companies like this. I would recommend him to anyone and will to all my friends. THANKS DAN

Honest, knowledgeable, and great craftsmanship. Will be returning to this shop for all of my future machining needs.

I must say, this place is a great find! The staff is very knowledgeable and genuinely friendly. They delivered service in a timely and efficient manner. I give them a solid 5 of 5 stars.

Precision owner was able to correct a problem for me that same me time and lots of money on my service item repair. Their over 40 years of experience will serve you well. Excellent!!!!

I enjoyed working with Precision Cycle Inc. He helped me with my handlebars for my Victory Vision and my mirrors. Will continue to go back when I need help.

Very friendly and helpful and went out of there way to make sure it was right. I will tell everyone I know that they do the best work. I will be back.

Called around looking for a machine shop to do a small job and the owner Don answered the phone. He was friendly and listened to the description of what we wanted done. Dropped off the pieces at his shop in the morning and he took detailed notes. Came back the next afternoon and he had it completed. The work was done perfectly, on time, and for the price quoted. All the welds were clean and even, the pieces were square and straight and he took care to prime all the bare metal even though we hadnt discussed that. He didnt miss anything we had asked for and took the time to make sure the job looked good. If you need a machine shop in this area we would highly recommend this shop. We will use them again if we need anything machined or welded.

Very nice owner. Takes the time to walk you through everything and has a passion for what he does. 5 stars isnt enough!

I own a business and have sent them work. They are awsome. I would rather send it to them than take it down the street. Thank you for everything and Ill be calling soon

Needed a dirt bike crank assembled and trued. Don did a great job and turned it around in less than 48 hours. Would recommend to anyone.

The owner seems a nice guy...but I expected a better job for the money I spent. I ended up buying used parts for my motor on Ebay for much less than what he charged me for his labor, after the one he fixed failed.

Had these guys weld up a custom header/exhaust connection for my Honda Grom... excellent service and the quality was amazing. On time and on budget. And they have a DeLorean to look at in the shop! Couldnt recommend then any higher. Ill be back.

I found Don on the internet and spoke to him about boring and honing my 2000 Yamaha 90 hp outboard that had lost a rod bearing and scored a cyl. He stated he could get it done quickly so I gave him a shot. Figuring it was peak boating/riding season it might get shelved for a bit. Absolutely not!! I sent it to him on a Wednesday he had the work done by Friday and it was back at my door on Tuesday. After checking all the tolerances of all the piston rings they were spot on to the tolerances in the manual. Absolutely perfect. Hes a great guy, communicates well, and is willing to answer questions and gets the job done right! What more could you ask for! Thank you Sir,Mark, Myrtle Beach, SC.

Awesome service quick and easy extra information great price

Amazing shop, cool guy, friendly dog. Very nice experience, very helpful 😊

Very Fast service and great quality ! Ive had 2 outboard blocks board at PCI and both were perfect .

I called 10 different shops to work on my turbo and he was the only one willing to machine it i will be sure to bring him more of my parts to work on plus the quick turn around time hope this helped

I needed a helicore on the stripped hanger of my road bike. Last chance to save the frame. After suggesting I might find a shop closer to home, Don gladly agreed to do whatever it took to get me riding again. Despite not being real familiar with bicycles he grasped what I needed, considered several possible fixes and finally did a great helicore. He was determined to solve my problem and be of service in whatever way was required. He is highly skilled and has a great heart. Would highly recommend Precision Cycles. Well worth a 75 minute drive!John Punderson Indian Harbour Beach FL

Brought in a driveshaft to be shortened, Don welded it so well it didnt even need to be balanced. 5/5 would recommend!

Don is a great guy ! He always does the impossible thanks Don

They do absolutely pristine craftsman-like work at a very reasonable price and they took the time to help explain to us the process and how to get what we wanted & needed.

Don is terrific!! Turnaround fast & complete!! Recommend highly!! Thank you Don!!

Scam artist tells you credit card holds product 1 week and does no work. Avoid avoid avoidSend to millennium half the price avoid avoid

Don is both a gentleman and a craftsman, he totally exceeded my expectations and i cannot recommend him highly enough. Thank you.